Studio Tour – Have a look around….

Welcome to the metals studio!

Messy, perhaps, but to me it’s full of nothing but potential.  It’s a space that is designated for creating. Ideas are born and culminated here. This is a beautiful thing.

.

I know. I know. It’s a mess. I resisted the urge to clean up before snapping these shots. I assure you that it is actually quite organized in a way that works for me. I know where everything is!

My main bench is to the right in the first room, and then you can see the hot table in the second room.

My bench is a modified watchmaker’s bench. Elsewhere in the bench room I also have a standard jeweler’s bench with the curved cutout and scrap tray, and a modified wooden desk with a skin (jewelers know what this is). Adjusting to the flat front of a watchmaker’s bench was tough, but now I enjoy it. It works well for me, especially with my GRS Benchmate. Because it is a watchmaker’s bench, it does offer a much better array of drawers, as does the watch crystal cabinet to the right behind my purple chair. This is a cabinet for Flex-O crystals with a foot pedal in the base that operates the arm on top to install crystals.

Many jewelers have torch setups at their benches. I prefer to have the torches in a separate location, along with an assortment of firebrick (see right), honeycomb and tripods, etc. I need to be able to work “large” with the torch, and I couldn’t do that safely at the bench. I have two torch outfits – one air/acetylene and one oxy-propane. My range of torch tips is quite broad – #00 to #8.

Back in the bench room, most of my hammers, except the really large and heavy ones, are on the peg board overhead. The latest addition (shown in the overall photo on the right with the black head) is the large vertical cross-peen hammer I found at SNAG last year. I was so excited about finding that! But my favorites are the Peddinghaus forming hammers. They have always served me well. Germans make great hammers.

I also have three anvils, but again the Peddinghaus is my favorite. (I have no ties to the Peddinghaus Corporation or any other company mentioned here, other than years of using these tools with wonderful results.) My husband drove about 500 miles to pick up this anvil for me from a blacksmiths’ supplier. I have forged, fold-formed, planished and just plain had it out on this anvil. It is a small one, only 45 pounds. It sits just to my right when I’m at the bench. I need to do something about that big crack in the stump. As the wood has dried over the years indoors, that crack keeps getting bigger. It’s too easy to lose parts in there. (Hmm, I could make a sheet lining to fit there that would be great for forming….)

My other anvils include a really large rough one given to me by a horseman. Its flat horn is broken, but I don’t mind. I call her Isabel, named for her stump, which my dad brought me after Hurricane Isabel took down a huge maple in his yard. The third one is made from a section of railroad iron.

Pliers are incredibly important for me. I really enjoy using an assortment of specialty pliers. Many metalsmiths prefer to get by with a basic set, but I like tools, and I don’t mind buying a tool even if it only performs one little function. It sure does help when its time comes. Of course, this means I have lots of pliers. I don’t know how many. I suppose I could count them, but I don’t really need to know that, do I?

.

In a case to my right when I’m sitting at my bench is a stack of shelves with pieces from my found object collection. I like to have these things where I can watch them, or see them, and see what might develop. I really enjoy working with found objects, and I’ve collected lots of interesting relics. Who knows what they will become.

Getting back to the tools, I have many favorites. This dapping set (to the right), containing punches and a beautifully polished block, is fantastic. One of the punches has a gouge in it, and it arrived that way. Most people would have returned it and required a replacement be sent, but I didn’t. I just work around it, or not.

I also found this corrugating roller in a jeweler’s supply shop in Florence, Italy. What a wonderful way for me to remember that trip, along with the Italian hammer and oval bezel mandrel. (Italians make nice tools, too!)

My rolling mill is also a relic. I purchased it from another metalsmith. I did a little research on the manufacturer, and discovered that the company was only in operation for about 20 years around the turn of the 20th century. So, my rolling mill is a centenarian. I had the rollers redressed at a machine shop, and a wood-turning client made me a new handle. Still rolling strong!

I really enjoy getting tools, and even supplies, that have a little history whenever possible. A watchmaker in my area retired, and I bought his collection of watch crystals, most of which were vintage, but never used. I also bought a couple of benches from him, as well as several watch crystal cabinets. I may never exhaust this supply of crystals. I have thousands of them, all different kinds. It’s nice to have when a customer requests a replacement, as is my inventory of watch bands. But, really, I use them for other things, such as lockets or windows in sculptural pieces. Just imagine!

There are many other items of interest in the studio. A welder friend built me a hydraulic press to my specifications. And then, just to make me smile (prompted by my apprentice) he painted it purple. I’ve never seen another purple hydraulic press. I also have a German guillotine shear that I bought from a shop in California. I think this was my first significant “used” tool purchase, sometime back in the mid-1990s. I obtained a large enameling kiln from an artist in New England, and a ring stretcher from the widow of a jeweler in the next town over from my hometown. My dad gave me the bandsaw for Christmas one year, and I think I bought the buffing wheel on ebay. Yes, ebay. I have a fantastic forged steel soldering pick given to me by another apprentice. My found object collection, in addition to what I’ve gathered myself, was given to me by about 67 of my friends and family – at least that’s how many people I sent the email to when I was headed west for a found object class. I received little packages of goodies in the mail for weeks. It was bliss. The point here is that most things have a story. Stories matter.

I enjoy various types of artwork around me as I’m working. The music is important, as is the other artwork. I have a clothesline overhead with a rotating collection of images of other metalsmiths’ work. I enjoy collecting these cards, and find them perpetually inspiring. I have paintings and photography that is the work of my friends, but my favorite is a strange but simple installation I did using my vintage typewriter (also a precious gift), and an antique frame from our family.

Scroll down to check it out.

.

.

.

Thanks for reading.

Advertisements

~ by gingermeekallen on January 31, 2010.

6 Responses to “Studio Tour – Have a look around….”

  1. Thanks for the tour. Your words and photos bring back many memories–and those all-important stories–for me. I enjoyed visiting that space again, even if only in virtual space. On another note, I love, love, love the photos of some of your new work in the Flickr Gallery. Your talent and creative expression just get better and better. You are nurturing a God-given gift in a truly beautiful way.

  2. The stories always stick, don’t they?!? Thanks for your kind words….

  3. I like how you begin and end with “potential.” That’s what I see here! This is a metalsmith’s dream come true – heaven on earth. From the watchmaker’s bench with all the drawers (I dream of tiny drawers and already have a label-maker for when I get them) on to the “steel” of the hammers, anvils and mills that makes my heart melt, to the wonderful, soulful collection of found (or should I say “snet”) objects, it all adds up to a wonderful place to create. I can’t wait to see it, I really can’t. Really.

  4. Oops I meant “sent” not “snet”!!

  5. This inspired me to work harder on putting together my own studio. I’ve got all sorts of tools, but not a heck of a lot of space to put them all. I’ll just work with the potential I have right now, and hope a larger studio space comes my way in the future. Hopefully near future.

  6. That’s a very impressive work space (and pliers collection).

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: